Polymer-dispersed liquid crystal composites for bio-applications: thermotropic,surface and optical properties

Polymer-dispersed liquid crystal (PDLC) systems based on polysulfone as carrying matrix and 4-cyano-4?-pentylbiphenyl (5CB) liquid crystal (LC) were obtained as thin transparent films. The PDLC films were prepared by solvent- and thermally induced phase separation methods, with various compositions in the two components. Information on the phase separation was obtained by polarised light optical microscopy, differential scanning calorimetry and scanning electron microscopy. The PDLC composites show well-defined droplets of submicrometric size, around 650 nm for a medium content of LC and around 250 nm for a low one. The droplets show a radial configuration and a homeotropic alignment of the LC molecules within. By contact angle measurement and surface free energy calculations, it was established that self-assembling of aliphatic units of the two composite components, at droplet interface, is the driving force of the homeotropic alignment. Moreover, these data indicated the potential biocompatibility of the studied composites. The photophysical behaviour shows a better light emission of the PDLCs containing bigger droplets.     

Synthesis,structural characterization and in vitro cytotoxic activity of novel polymeric triorganotin(IV) complexes of urocanic acid

Two novel triorganotin carboxylate complexes of the biologically active urocanic acid have been synthesized and characterized. Elemental analysis, melting point, spectroscopic techniques – IR, ¹H, ¹³C and ¹¹⁹Sn NMR – mass spectrometry and X‐ray diffraction studies have been used for structural characterization. Crystal structures of the tin(IV) derivatives show that urocanic acid acts as a bridging bidentate ligand through its imidazole nitrogen atom and its carboxylic group, producing a polymeric one‐dimensional chain. The molecular structures of the complexes, catena‐poly‐tri(n‐butyl)tin(IV) 3‐(3H‐imidazol‐4‐yl)prop‐2‐enoate (1) and catena‐poly‐triphenyltin(IV) 3‐(3H‐imidazol‐4‐yl)prop‐2‐enoate (2), present a distorted trigonal–bipyramidal configuration. This is further confirmed by ¹¹⁹Sn NMR in the solid state. The tin(IV) derivatives form double‐stranded ribbons via N―H^…O―H bonds. Nevertheless, the compounds are essentially monomeric in solution, with a tetrahedral configuration as observed by ¹¹⁹Sn NMR in solution. The cytotoxic activity of the titled compounds has been tested against six human cell lines and the corresponding IC₅₀ values are reported. Both tin(IV) compounds have a high to very high in vitro cytotoxic activity against the tumor cell lines K562, HCT‐15 and MCF‐7. Compound 1 is 86 times more active than cisplatin in the HTC‐15 cell line. Copyright © 2012 John Wiley & Sons, Ltd.     

Theoretical Studies on the Mechanistic Insertions of Singlet Methylene and Halomethylene into Polar S‒H Bonds of Methanethiol,Ethanethiol, 1-Propanethiol and 2-Propanethiol

Abstract

The insertion of ¹CH₂, ¹CHF, ¹CF₂,¹CHCl, and ¹CCl₂ into primary and secondary polar S?H bonds of methanethiol, ethanethiol, 1-propanethiol, and 2-propanethiol have been investigated at HF (Hartree–Fock), MP2 (Møller–Plesset Perturbation Theory), and DFT (density functional theory) levels using 6-31G (d, p) basis set. The insertions follow a two-step mechanism. The potential energy surface exploration identifies ylide-like structures undergoing the 1,2-sigmatropic hydrogen shift concertedly giving the thioether product. But ¹CF₂ forms weak complexes involving 1,2-hydrogen shift. The barrier height in the concerted mechanism varies with the type of carbene moiety and S?H bond. The initial interaction seems to be a function of HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) energies of thiols and carbenes, respectively. The natural bond orbital charge analysis showing a net charge flow from the substrate thiol to the reagent carbene at the transition states corroborates this fact.     

Pressure induced phase transitions in Ga1 − x In x P

We have theoretically investigated the effect of pressure on the structural stability of GaP?:?InP mixed system. The three-body-potential (TBP) model has been used. The TBP model consists of long-range as well as short-range interactions; the long-range part includes the modified Coulomb force as well as a three-body term; the short-range part in TBP defines the van der Waals and overlap repulsive interactions. We observe a pressure-induced structural phase transformation from ZnS (B3) to NaCl (B1) type phase in Ga _1?x In _x P. Our calculated transition pressures for the initial GaP and final InP compound semiconductors are in good agreement with other reported data.     

High-Density Excitons in a Diluted Magnetic Semiconductor: Cd 1 − x Mn x Te

Time-resolved magneto photoluminescence in a diluted magnetic semiconductor Cd 0.9 Mn 0.1 Te has been carried out with varying exciton density from 10 14 to 10 19 cm m 3 . The reduction of the Zeeman shift and that of the magnetic polaron energy was found under strong photoexcitation. The spectral feature is interpreted in terms of the heating of the manganese spin subsystem. Polarization dependence of the spin heating is observed for the first time, revealing the contribution of the spin flip between excitons and magnetic ions to the heating process.     

One-step construction of MoO_2 uniform nanoparticles on graphene with enhanced lithium storage

Transition-metal oxides are considered to be a promising anode material for lithium-ion batteries(LIBs)due to their high capacities,low cost,and ease of synthesis.Herein,a hybrid nanosheet composed of uniform MoO_2 nanoparticles(NPs) homogeneously immobilized on the reduced graphene oxide nanosheets(MoO_2 NP@rGO) is first synthesized by a self-templating and subsequent calcination treatment.The unique two-dimensional hybridnanosheets provides several merits.rGO can be used as a favorable support for the loading of electrochemically active MoO_2 NPs.Meanwhile,MoO_2 NPs can effectively prevent the stacking of the rGO.The effective combination of MoO_2 NPs and rGO nanosheets furnish additional electrochemically interfacial active sites for extra lithium ion sto rage.Noticeably,the as-fabricated hybrid nanosheets deliver a reversible capacity of 641 mAh/g after 350 cycles at a current density of 1000 mA/g with a good rate capability.The greatly enhanced lithium storage properties of MoO_2 NP@rGO indicate the importance of elaborate construction of novel hybrid hierarchical structures.     

Dynamics of the Up-Conversion Emission in Holmium Doped Zblan Fiber

The dynamics of up-conversion, green emission under excitation at different infra-red wavelength in Ho^3? doped ZBLAN fiber is reported. Under infrared, 890 nm quasi cw pumping the complicated temporal behavior of the up-conversion signal is strongly influenced by the intermediate ⁵I₅ state cross relaxation. The mechanisms of the observed up-conversion processes are proposed and the time evolution of the ⁵S₂ population is described by the rate equation model. Parameters of the model are determined and numerical simulations of the excited state dynamics are performed.     

Overwriting information: Correlations,physical costs,and environment models

In this sequel to our previous study of the entropic and energetic costs of information erasure [N.G. Anderson, Phys. Lett. A 372 (2008) 5552], we consider direct overwriting of classical information encoded in a quantum-mechanical memory system interacting with a heat bath. Lower bounds on physical costs of overwriting – in both “single-shot” and “sequential” overwriting scenarios – are obtained from globally unitary quantum dynamics and entropic inequalities alone, all within a referential approach that grounds information content in correlations between physical system states. A heterogeneous environment model, required for consistent treatment of sequential overwriting, is introduced and used to establish and relate bounds for various cases.